Robots
Wall climbing robots perform non-destructive inspections on tanks, boilers, scrubbers, piping and more. Using specially-designed sensor payloads, the robots can inspect wall thickness, pitting, and many other forms of degradation. Our robots collect 1,000x more information with continuous data capture at speeds an average of 10x faster than previous methods.
We strive to provide the highest scan quality and overall coverage with our world-class robots and data platforms, giving you the insight to make confident decisions for your assets.
TOKA Series
(3 & 4)
Multi-angle ultrasonic scans
4 HD visual cameras
Speeds up to 60 ft/min
(18 meters/minute)
(18 meters/minute)
Improved localization sensor
Up to 24 transducers
Different Gecko sleds allow the robot to take scans at three angles simultaneously for piping walls or corrugated features
Lighting and image capture mimics that of a manual visual inspection. At least one hi-definition photo is taken per foot.
The robot and data collection architecture is FAST, allowing most assets to be completely scanned in one shift.
Your asset will be scanned repeatedly over the years. Our localizations sensors permit us to accurately pin the data to your physical asset and provide valuable insight on thickness change.
Our closest spacing between ultrasonic transducers is ¼” (5mm). We can find defects and map out trouble areas on your asset to a high fidelity.
TOKA 3
TOKA 4
(Most Popular)
TOKA 4 GZ
TOKA Flex
Best suited for
Medium-sized piping and high-temperature surfaces
Boiler walls, curved surfaces
Large flat surfaces (tank floors)
Piping
Number of Sensors
8
24 - 32
128
12 - 18
Longitudinal Data Density
>1 sample / inch
(> 39 samples / m)
(configurable with speed)
(> 39 samples / m)
(configurable with speed)
>1 sample / inch
(> 39 samples / m)
(configurable with speed)
(> 39 samples / m)
(configurable with speed)
>1 sample / inch
(> 39 samples / m)
(configurable with speed)
(> 39 samples / m)
(configurable with speed)
>1 sample / inch
(> 39 samples / m)
(configurable with speed)
(> 39 samples / m)
(configurable with speed)
Lateral Data Density
3" (76mm) between samples
1" (25mm) between samples
¼" (6mm) between samples
1" (25mm) between samples
Visual Imagery
1 x 720p camera
1 x 1080p camera
1 x 1080p camera
2 x 1080p camera
Speed
60 ft/minute
(18 meters/minute)
(18 meters/minute)
30 ft/minute
(9 meters/minute)
(9 meters/minute)
30 ft/minute
(9 meters/minute)
(9 meters/minute)
30 ft/minute
(9 meters/minute)
(9 meters/minute)
TOKA 3
- Medium-sized piping and high-temperature surfaces
- 8 sensors
- >1 sample / inch (configurable with speed)
- 3 inches between samples
- 1 x 720p camera
- 60 ft/minute
TOKA 4
- Boiler walls, curved surfaces
- 24 - 32 sensors
- >1 sample / inch (configurable with speed)
- 1 inch between samples
- 2 x 1080p camera
- 30 ft/minute
TOKA 4 GZ
- Large flat surfaces (tank floors)
- 96 sensors
- >1 sample / inch (configurable with speed)
- ¼ inch between samples
- 2 x 1080p camera
- 30 ft/minute
TOKA Flex
- Small diameter piping
- 12 - 18 sensors
- >1 sample / inch (configurable with speed)
- 1 inch between samples
- 2 x 1080p camera
- 30 ft/minute
